This is the optional 7.4V 1600mAh 20C LiPo Battery for the Dromida MT, BX and SC Vehicles.

• For use when converting Dromida vehicles to brushless power, see COMMENTS below

• 7.4V 1600mAh 20C LiPo Battery
• Instruction Sheet

• LiPo compatible charger
• LiPo charging bag

• Capacity: 1600mAh
• Number Of Cells In Series: 2
• Rated Voltage: 7.4V
• Continuous Discharge Rate: 20C
• Maximum Recommended Charge Current: 1C (1.6 amps)
• Charge Lead: 0.75" (19mm) long wire w/XH Balance Plug
• Discharge Lead: 20AWG, 3.5" (90mm) long wire w/Mini Plug
• Pack Dimensions: 3.3 x 1.2 x 0.7" (85 x 31 x 17mm)
• Weight: 3oz (85g) all plugs and wires are included in weights

• **Do not use to power Dromida vehicles with stock brushed power systems. The stock ESC is not compatible with LiPo batteries.**
• ALWAYS use a LiPo-approved Charger
• ALWAYS use a LiPo Cell Balancer
• NEVER Charge over 4.2V per cell
• NEVER Charge at currents greater than 1C
• NEVER Trickle Charge
• NEVER allow to Discharge below 2.5V per cell
• NEVER disassemble or modify pack wiring in any way or puncture cells
• NEVER place on combustible materials or leave unattended during charging
• ALWAYS Charge in a fireproof location
• ALWAYS set charger's output volts to match battery volts