Microcontrollers
- Arduino
- AVR Microcontrollers & Programmers
- Basic Stamp Modules and Starter Kits
- LilyPad E-Textiles
- PIC Microcontrollers & Programmers
- Rasberry Pi
Robot Kits
Electronics Parts
- Capacitors
- Crystals
- Diodes and Rectifiers
- Displays and Annunciators
- IC Sockets & Heat Sinks
- ICs
- LEDs and Photodetectors
- Resistors and Potentiometers
- Sensors
- Switches and Relays
- Transistors & FETs
- USB, Web & Memory Card Interfaces
- Wireless Communications
Hardware
- 3D Printers and Supplies
- Batteries
- BEAM Robot Kits
- Cables
- Glue
- Headers
- Metal Frame
- Mold Making and Casting Material
- Motor Controllers
- Motors
- Other Parts
- Paints
- Power
- Project Boxes
- Prototyping SMT by Schmartboard
- Prototyping
- Screws, Nuts & Bolts
- Servos
- Solar Cells And Education Kits
- Standoffs and Spacers
- Wheels
Tools
Education and Fun
LiPo 3S 11.1V 2200mAh 30C Elctrfly w/Star Plug
This is the Great Planes ElectriFly Lithium Polymer 2200mAh 11.1V 30C Battery Pack with Balance Connector.
Features:- Balancing allows all cells to fully charge to 4.2V ensuring maximum power from the pack, plus conditions the cells better so they will last longer
- Safer as long as the Cell Balancer or a properly equipped Charger with Balancing Capabilities is used
- Great Planes ElectriFly Lithium Polymer 2200mAh 11.1V 30C Balance Battery Pack with ElectriFly Balance Connector, Star Plug and Instruction Sheet
- Balancer such as the Equinox LiPo Cell Balancer (GPMM3160) and LiPo
- compatible charger OR
- LiPO compatible charger and balancer such as the ElectriFly
- AC/DC TritonEQ (GPMM3155) or the ElectriFly AC/DC Triton2 EQ
- (GPMM3156)
- LiPo Charging Bag
- Capacity: 2200mAh
- Number Of Cells In Series: 3
- Rated Voltage: 11.1V
- Discharge Current: 30C
- Maximum Recommended Charging Amps: 2.2A
- Pack Dimensions: 4.0 x 1.4 x 0.94" (102 x 35 x 24mm)
- Weight: 6.1oz (174g)
- READ the ENTIRE instruction sheet included with battery before use
- ALWAYS use a LiPo-approved Charger
- ALWAYS use a LiPo Cell Balancer
- NEVER Charge over 4.2V per cell
- NEVER Charge at currents greater than 1C
- NEVER Trickle Charge
- NEVER allow to Discharge below 2.5V per cell
- NEVER disassemble or modify pack wiring in any way or puncture cells
- NEVER place on combustible materials or leave unattended during Charging
- ALWAYS charge in a fireproof location
- ALWAYS set charger's output volts to match battery volts
- ALWAYS keep out of reach of children
Brand: | Great Planes |
Brand Part Number: | GPMP0861 |
Our Part Number: | h6676 |